Iscar Adds Their Most Recent Creations To A Extensive Line Of Successful Hole Producing Solutions
Iscar recently released numerous different drilling innovations to meet their customers needs. These latest products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their expertise Iscar has come up with brand new and innovative ways to boost productivity for the end user. Here is a little bit about these new products, and how they will serve the end user of these products.
SUMOCHAM Drills
ISCAR's new SUMOCHAM drill family is an advanced evolution of the tremendously effective CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for a variety of material groups. SUMOCHAM drills can be used on milling centers or lathes.
SUMOCHAM incorporates four different standard drill head geometries, designed for optimum performance and high reliability. The drill head is manufactured with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are offered in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for improved penetration.
The drill shank design is according to DIN 9766 standard, with obtainable drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies showcase coolant through holes. The accurate cylinder added to the clamping portion increases durability and reduces internal stresses. The rotation stopper planes are precision ground, to improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will provide longer tool life and higher productivity.
DR-DH Deep Drills
DR-DH drills can achieve drilling depth-to-diameter ratio of 7XD and up. Constructed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of supplemental machine and setup can be avoided. They will be obtainable as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").
Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very stiff tool with a patented chip gullet design. It was built for easily cut materials like cast iron and low alloyed steel.
A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for upgraded chip flow. It was tailored for drilling gummy materials like non-alloyed steel and high temperature alloys.
ISCAR DEEP HOLE DRILLS
With ISCAR's innovative solid carbide deep hole drills, you can safely drill up to 22 times diameter and reach bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capacity can speed up many high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it fully because a drill broke.
Different target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A mixture of features assist the twist drills to cut faster, straighter,deeper, last longer and expel chips more readily. A special high-strength core creates a more durable drill point and allows for deeper flutes, enlarging the exit path for chips.
The drill tip themselves have a 140 positive-point, four-margin design to maintain the edge, diminish thrust forces and assist centering and tracking. A post-coat polishing step on the flutes, margins and cutting edges decreases friction and torque that can easily snap a drill.
The new drills are available in normal diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are attainable on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.
These are just some of the latest innovations coming from Iscar.
Iscar Recently Releases Numerous Brand New Lines To Increase Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
The Most Recent In Carbide Endmill Architectures In A Extended And Productive Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
A Couple Of The Several Improvements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Several Improvements Have Enhanced Iscar's Families Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Completely New End Mills From Iscar Will Increase Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
What Vehicle Engineering Careers Do.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.
Watch Out For Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.